Magura Storm SL.2 Rotor 180mm 6-Bolt Steel One Piece Disc Brake Rotor

I replaced my Magura rotor with the same one after 8000 miles of use on a heavy eBike riding steep climbs every day. They never squeaked or faded during wet or dry weather even on long steep descents. I did follow the break-in instructions closely including maximum-pressure stopping 10 times on each wheel from 20 km/hour before going on a regular ride. I used the manufacturer's specs for minimum rotor thickness (1.8mm or .071") to know when to replace them. Super easy process of removing 6 bolts with a Torx T25 driver and using supplied new bolts to install the new rotor. Ideally use a torque wrench set to 4Ncm or 35lb-ft. The bolts have pre-applied thread sealer to keep them from loosening.

I replaced my Magura rotor with the same one after 8000 miles of use on a heavy eBike riding steep climbs every day. They never squeaked or faded during wet or dry weather even on long steep descents. I did follow the break-in instructions closely including maximum-pressure stopping 10 times on each wheel from 20 km/hour before going on a regular ride. I used the manufacturer's specs for minimum rotor thickness (1.8mm or .071") to know when to replace them. Super easy process of removing 6 bolts with a Torx T25 driver and using supplied new bolts to install the new rotor. Ideally use a torque wrench set to 4Ncm or 35lb-ft. The bolts have pre-applied thread sealer to keep them from loosening.

I replaced my Magura rotor with the same one after 8000 miles of use on a heavy eBike riding steep climbs every day. They never squeaked or faded during wet or dry weather even on long steep descents. I did follow the break-in instructions closely including maximum-pressure stopping 10 times on each wheel from 20 km/hour before going on a regular ride. I used the manufacturer's specs for minimum rotor thickness (1.8mm or .071") to know when to replace them. Super easy process of removing 6 bolts with a Torx T25 driver and using supplied new bolts to install the new rotor. Ideally use a torque wrench set to 4Ncm or 35lb-ft. The bolts have pre-applied thread sealer to keep them from loosening.

All good. Fast delivery

All good. Fast delivery