This shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette or freewheel.
Works on 5-spe...
Park Tool Derailleur Alignment Gauge and straighenner for keeping drive train in correct alignment.
*Compared to DAG-2
Adjusts to fit 20 inches to 29 inches+ wheels
Gauge bar made of heavy gauge, ...
Chainring lockring tools from Park Tool.
Fits chainring of Specialized, Cannondale and FSA
For lockrings with 47-48mm outside diameter and 4 or 8 notches
Fits both 4 notch (FSA and Cannondale) and ...
Park Tool offers a selection of tools for adjusting, removing, and installing bottom brackets.
Fits 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter (in the notches) o...
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors. The BBP-AOS utilizes an expanding collet and ex...
With extra-tall uprights and wide calipers, the TS-2.3 Professional Wheel Truing Stand is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including whee...
High-quality Socket and bits selected specifically to tackle a wide variety of common bike repair needs.
All Sockets and Bits are 3/8" drive
3, 4, 5, 6, 8 and 10mm hex bits
8, 9, 10, 13, 14, 15mm ...
For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems.
FR-5.2G uses a 5mm guide pin designed to fit perfectly inside a Quick-rel...
A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have ...
For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished.” To check this, and to make precision adjustments, a wheel alignment gauge (...
Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use.   Available in Y, L-Shape and folding versions
Ball head on long end to reach hard access fixtures for...
The CP-1.2 is a great alternative to a traditional chain whip for removal and installation of bicycle cassettes. Utilizing a simple-yet-effective design that allows for one-handed operation, the CP...
Park Tool offers a selection of tools for adjusting, removing, and installing bottom brackets.
HCW-11 fits "slotted" bottom bracket adjusting cups and cups with raised 16mm wrench flats
Opposite e...
Self-Extracting crank cap tool
Removes and installs 8-point adjusting caps on Shimano Hollowtech II crank/bottom bracket systems
Built in hook to lift safety plate on left side Shimano Hollowtech I...
Crank puller for removing square tapered cranks. Fine threads and long handle provide additional leverage for the tightest cranks.
22mm x 1mm fine thread provides leverage needed to remove tight ...
Park Tool Freewheel Removers are made from durable, heat treated alloy tool steel for long life.
Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads
For 16t and lar...
Home Mechanic pedal wrench with long padded handle to loosen or tighten pedals.
Length: 11-1/2" (29 cm)
15mm pedal wrench, made from heat-treated spring steel, is built to last
Vinyl dipped handle...
Park Tool head and steerer tube cutting tools in sets.
Combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups
Includes 33.9mm reamer, and four different si...
BBT PressFit Bottom Bracket Tool Set
Designed and built to install and remove of the bearings used in bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems
BBT...
Park Tool offers a selection of tools for adjusting, removing, and installing bottom brackets.
36mm box-end and bottom bracket pin spanner
Center to center measurment between pins is 29mm and pin ...
A versatile digital scale built to accurately weigh bikes, frames, and components.
Includes a dual position, silicone coated hanging hook
Designed to be clamped solidly into a repair stand or hung ...
Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use.   Available in Y, L-Shape and folding versions
Specially designed for cranks and pedals, HT-8 hex tool ...
