Free shipping - On orders over $75
Easy returns - 30-day return policy
Expert support - Ride with confidence
Collection:
Drivetrain Tools
556 productsFilter by
Clear
Filter by
Apply
Clear all
What are you shopping for?
Sort By
Showing {{ store.pageSize * (store.currentPage-1) + 1 }} - {{ Math.min(store.pageSize * store.currentPage, store.totalHits) }} of {{store.totalHits}} products
{{100 - (Math.floor((item.price / item.compare_at_price)*100).toFixed(0))}}%
Best seller
sale
in stock
Threaded Chainring Removal Tool Chainring Removal Tool Silver Sram Threadmount 00.6218.065.000
Regular price
$69.06
Sale price
$69.06
Regular price
$70.00
Unit price
/per
Designed to be used with all SRAM power meters with threadmount rings, both 1x and 2x. This tool is required for proper removal of all threaded chainrings.
Includes backup pin
Required for chainrin...
Park Tool Disc Brake Tools Rotor Truing Silver/Blue DT-2.2
Regular price
$25.95
Sale price
$25.95
Regular price
$25.95
Unit price
/per
Bicycle disc brake rotors can become warped from extensive use, excessive heat, or impact. Even new disc rotors may not always be perfectly straight, causing annoying pad rub and affecting performa...
Park Tool BKM-1.2 Brake Bleed Kit Bleed Kit Various BKM-1.2
Regular price
$171.95
Sale price
$171.95
Regular price
$171.95
Unit price
/per
The Park Tool BKM-1.2 Brake Bleed Kit is designed for bleeding most mineral oil-based hydraulic brake systems. Suitable for both home mechanics and daily commercial use, this kit includes two syrin...
Park Tool CM-5.3 Cyclone Chain Cleaner Chain Cleaner Blue CM-5.3
Regular price
$34.95
Sale price
$34.95
Regular price
$34.95
Unit price
/per
The Park Tool CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservo...
Park Tool Bike Cleaning Brush Set, BCB-4.2
Regular price
$25.95
Sale price
$25.95
Regular price
$25.95
Unit price
/per
The Park Tool BCB-4.2 Bike Cleaning Brush Set is a four-piece kit designed to clean hard-to-reach areas on most bicycles. The set includes a Gear Clean Brush (GSC-1), a Tapered Detail Brush, a Fram...
Park Tool PP-1.2 Hydraulic Brake Piston Press Piston press PP-1.2
Regular price
$23.95
Sale price
$23.95
Regular price
$23.95
Unit price
/per
The Park Tool PP-1.2 slides between disc brake pads inside the caliper, allowing the user to spread the pads and compress the hydraulic pistons when replacing pads, aligning pads, or performing oth...
Park Tool IR-1.3 Internal Cable Routing Kit Cable Guide Set
Regular price
$80.95
Sale price
$80.95
Regular price
$80.95
Unit price
/per
The IR-1.3 speeds the internal routing of electronic wires, shift cable/housing, brake cable/housing and hydraulic brake line on carbon fiber, titanium and aluminum frames . Includes a guide magnet...
Park Tool FR-1.3 Freewheel Remover - Durable Alloy Tool for 5-10 Speed Shimano & Multi-Brand Bicycle Freewheels
Regular price
$9.98
Sale price
$9.98
Regular price
$9.95
Unit price
/per
Discover the ultimate bicycle maintenance tool with the Park Tool FR-1.3 Freewheel Remover, engineered for professionals and cycling enthusiasts alike. Crafted from durable, heat-treated alloy tool...
Park Tool CT Replacement Pins Chain Breaker Replacement Pins Fits CT-1,2,3,5, and 7 series CTP-C
Regular price
$8.08
Sale price
$8.08
Regular price
$4.42
Unit price
/per
These are replacement chain pins designed for Park Tool chain breakers. Each card contains two durable, high-quality pins compatible with the CT-1, CT-2, CT-3, CT-5, and CT-7 series chain tools. Th...
Pedros Chain Checker Plus II Chain Checker 6460701
Regular price
$19.26
Sale price
$19.26
Regular price
$18.99
Unit price
/per
Pedro's Chain Checker Plus II (Model 6460701) is a black chain wear tool designed to accurately measure chain wear at 0.50% and 0.75%. Its precision laser-cut, three-point design properly isolates ...
Jagwire Brake Pad Tuner Toe-in Tool
Regular price
$11.31
Sale price
$11.31
Regular price
$12.95
Unit price
/per
Achieve quick and consistent build quality with this easy to use toe-in tool.
Designed for easy toe adjustment
Works with all rims including deep section rims
Park Tool Chain Checker Chain Checker CC-2
Regular price
$27.95
Sale price
$27.95
Regular price
$27.95
Unit price
/per
The Park Tool CC-2 Chain Wear Indicator allows you to quickly and accurately measure the wear, or "stretch," of nearly all bicycle chains. To use, insert the tool's pins into two chain links, press...
Premium Bicycle Cleaning Brushes Collection – Durable Nylon, Ergonomic Handles & Angled Contoured Designs for Hard-to-Reach Drivetrain & Cassette Maintenance
Regular price
from $5.54
Sale price
from $5.54
Regular price
$2.95
Unit price
/per
Discover the ultimate collection of premium bicycle cleaning brushes designed to keep your bike performing at its best. These expertly crafted tools from Park Tool feature specialized designs, dura...
Mavic ID360 Bearing Cap Remover Bearing Tool Silver ID360 V2550201
Regular price
$66.81
Sale price
$66.81
Regular price
$50.00
Unit price
/per
The Mavic ID360 Bearing Cap Remover is a specialized tool designed for bearing adjustments on Mavic InstantDrive 360 rear hubs. It is compatible with the ID360 model and is identified by model numb...
Hayes Brake Hayes Bleed Fittings, Pre-Dominion
Regular price
$21.86
Sale price
$21.86
Regular price
$16.99
Unit price
/per
Hayes Pre-Dominion Bleed Fittings are red bleed kit fittings designed for use with legacy systems.
Designed for use with Hayes Pre-Dominion brake systems, ensuring proper brake bleeding.
Includes ...
Birzman Razor Clam, Caliper Alignment Tool
Regular price
$11.90
Sale price
$11.90
Regular price
$9.30
Unit price
/per
Assist in aligning disc calipers when installing . Accommodates two and four piston systems . Compatible with rotors up to 2.3mm in width
Park Tool Chain Checker Chain Checker CC-3.2
Regular price
$12.95
Sale price
$12.95
Regular price
$12.95
Unit price
/per
The Park Tool CC-3.2 Chain Wear Indicator accurately measures chain wear at 0.5% and 0.75%, the levels where most chain manufacturers recommend replacement. This simple go/no-go tool has been updat...
Shimano TL-FC16 Crankset Arm Installation Tool
Regular price
$6.71
Sale price
$6.71
Regular price
$0.00
Unit price
/per
Shimano crank arm tools to install and remove for specific models.For use when installing left crankarm onto HollowtechII crank spindle
SRAM/Avid Pro Bleed Syringe O-ring Kit with Fitting O-ring , Coupling O-rings and Bleeding Edge O-rings, 10 Kits
Regular price
$9.44
Sale price
$9.44
Regular price
$10.00
Unit price
/per
The SRAM/Avid Pro Bleed Syringe O-ring Kit includes fitting O-rings, coupling O-rings, and bleeding edge O-rings for servicing SRAM disc brake systems. This package contains 10 kits, each with the ...
Park Tool LRT-3 Lockring Tool - Specialized, Cannondale, FSA
Regular price
$27.95
Sale price
$27.95
Regular price
$27.95
Unit price
/per
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale, and FSA modular cranks . For lockrings with 47-48mm outside d...
Park Tool BBT-RS BB Bottom Bracket Tool - Retaining System
Regular price
$47.95
Sale price
$47.95
Regular price
$47.95
Unit price
/per
Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, wh...
Lezyne Chain Drive Chain Breaker & Replacement Pins – Durable Chromoly Construction, Integrated Spoke Wrenches, Precision Bike Maintenance Tools
Regular price
$24.99
Sale price
$24.99
Regular price
$24.99
Unit price
/per
Discover the ultimate cycling maintenance tools with the Lezyne Chain Drive Chain Breaker and Replacement Pins — essential accessories for cyclists and bike shops seeking reliable, durable, and ver...
absoluteBLACK Disc Brake Piston Press Tool
Regular price
$43.09
Sale price
$43.09
Regular price
$41.95
Unit price
/per
The absoluteBLACK Disc Brake Piston Press Tool is designed to safely reset hydraulic brake pistons when installing new pads. It also functions as a bleed block. Unlike screwdrivers or levers that r...
SRAM Disc Brake Pad Spacers 2.8mm for Level, Red, Force, Rival AXS Calipers 2 Pack
Regular price
$10.84
Sale price
$10.84
Regular price
$15.95
Unit price
/per
This bundle includes two packs of SRAM Disc Brake Pad Spacers, each containing two spacers measuring 2.8mm. These red brake pad spacers are designed to fit snugly between the disc brake caliper pis...
SRAM DB8/Maven Standard Mineral Oil Bleed Kit - Mineral Oil Included
Regular price
$71.89
Sale price
$71.89
Regular price
$80.00
Unit price
/per
Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRA...
Park Tool CCP-44 Crank Puller Spline/ISIS/Octalink CCP-44
Regular price
$21.95
Sale price
$21.95
Regular price
$21.95
Unit price
/per
The Park Tool CCP-44C Crank Arm Puller is designed for removing square tapered crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles without a self-extracting system. It f...
Park Tool Cassette/Freewheel Remover Fits most BMX FreeWheels FR-6
Regular price
$25.95
Sale price
$25.95
Regular price
$25.95
Unit price
/per
Heat-treated alloy-steel construction . Thin-wall design allows for use with cones/locknuts . 25.4mm (1") base/head fits FR-series wrenches or vise
Removes four-notch BMX / single-speed freewheel f...
Campagnolo H11 Disc Brake Bleeding Kit
Regular price
$44.04
Sale price
$44.04
Regular price
$39.75
Unit price
/per
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes
Does not include mineral oil
Finish Line Gear Floss Microfiber Cleaning Rope, 20/Count
Regular price
$11.30
Sale price
$11.30
Regular price
$9.99
Unit price
/per
Finish Line Gear Floss Microfiber Cleaning Rope is designed for thorough cleaning of bike components such as cassettes, chainrings, derailleur pulley wheels, hubs, spindles, brake arms, and the bot...
Park Tool BBT-18 B.B. Tool Bottom Bracket Socket 8 Notch BBT-18
Regular price
$27.95
Sale price
$27.95
Regular price
$27.95
Unit price
/per
Bottom bracket tools intended for both shop and consumer use.
36mm wrench flats
Used to remove and install all Shimano ISIS Drive and ISIS Overdrive eight-notch bottom bracket cups
Park Tool BBT-9 B.B. Tool Bottom Bracket Wrench Hollowtech II BBT-9
Regular price
$38.95
Sale price
$38.95
Regular price
$38.95
Unit price
/per
The Park Tool BBT-9 is a combination tool designed for installing and removing 16-notch external bearing crankset bottom bracket cups and lockrings, such as Shimano Hollowtech II. It includes a rot...
Park Tool Flare Brake Wrench Wrench Silver MWF-3
Regular price
$14.95
Sale price
$14.95
Regular price
$14.95
Unit price
/per
A purpose-built wrench designed for compression nuts, nipples and other fittings found on hydraulic brake systems. The five-sided flare wrench head evenly spreads out the force being applied to the...