Early Access BFCM Sale! Get 10% Off Sitewide at Checkout | Offer Valid Thru 12/2

Origin8-Revolvr-BB-Pro-Cup-Tool-Bottom-Bracket-Tools-BBTL0032

SKU: BBTL0032

Origin8 Revolvr BB Pro Cup Tool Bottom Bracket Tool Silver Shimano HTII 2m

Origin8
$34.06
$34.06 $38.99
Sale Sold out
/
Free Shipping All Day, Every Day
BFCM Sale! Get an Extra 10% Off This Item at Checkout

Fast & Free Shipping

Chat with Support for Expert Advice

Manufacturer Warranty

This is a pre order item. We will ship it when it comes in stock.
Specifications

Size12-Notch x 36mm
ColorSilver
Driver1/2`
Tool TypeBottom Bracket Tool
CompatibilityShimano HTII 24mm and SRAM GXP 22/24mm
BrandOrigin8 BB90/95

TOOL BB OR8 REVOLVR 12-NOTCHx36mm CUP TOOL w/POST

  • Shop quality bottom bracket tool for damage-free installation and removal of Origin8 Revolvr 12-notch x 36mm BB cups
  • Center post helps to fix and stabilize the tool in to the BB cup
  • 1/2` drive is compatible with ratchet and torque wrenches
  • Required for J&B Part #s 211565 and 211566
Description

TOOL BB OR8 REVOLVR 12-NOTCHx36mm CUP TOOL w/POST

  • Shop quality bottom bracket tool for damage-free installation and removal of Origin8 Revolvr 12-notch x 36mm BB cups
  • Center post helps to fix and stabilize the tool in to the BB cup
  • 1/2` drive is compatible with ratchet and torque wrenches
  • Required for J&B Part #s 211565 and 211566

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Roger Ronald

Pretty easy and effective. Just insert and drive with a 1/2" torque wrench. With the spec'ed torque the BB did not seat so I used a bit more pressure to get it to do so. I don't thing there's any issue my bearing cups were just a bit tight. Regardless the tool was fine.

R
Roger Ronald

Pretty easy and effective. Just insert and drive with a 1/2" torque wrench. With the spec'ed torque the BB did not seat so I used a bit more pressure to get it to do so. I don't thing there's any issue my bearing cups were just a bit tight. Regardless the tool was fine.

R
Roger Ronald

Pretty easy and effective. Just insert and drive with a 1/2" torque wrench. With the spec'ed torque the BB did not seat so I used a bit more pressure to get it to do so. I don't thing there's any issue my bearing cups were just a bit tight. Regardless the tool was fine.;